Checking The Final Gear Oil Level
Fragment manuala — str. 172
📋 Tekst do skopiowania / wyszukiwania
CHASSIS
Final gear oil filler bolt
T.
R.
23 Nm (2.3 m·kg, 17 ft·lb)
EAS21470
CHANGING THE FINAL GEAR OIL
1. Place a container under the final gear case.
2. Remove:
• Final gear oil filler bolt “1”
• Final gear oil drain bolt “2”
a. High position Completely drain the final gear case of its oil.
b. Standard position
c. Low position
b. Move the shift pedal to the desired position.
c. Install the shift pedal bolt, and then tighten it
to specification.
Shift pedal bolt
T.
R.
7 Nm (0.7 m·kg, 5.1 ft·lb)
LOCTITE®
3. Check:
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲ • Final gear oil drain bolt gasket
EAS21460 Damage → Replace.
CHECKING THE FINAL GEAR OIL LEVEL 4. Install:
1. Stand the vehicle on a level surface. • Final gear oil drain bolt
NOTE: (along with the gasket New )
• Place the vehicle on the centerstand.
• Make sure the vehicle is upright. Final gear oil drain bolt
T.
R.
23 Nm (2.3 m·kg, 17 ft·lb)
2. Remove:
• Final gear oil filler bolt “1” 5. Fill:
3. Check: • Final gear case
• Final gear oil level (with the specified amount of the recom-
The final gear oil level should be to the bot- mended final gear oil)
tom brim “2” of the filler hole.
Below the bottom brim → Add the recom- Quantity
mended final gear oil to the proper level. 0.20 L (0.21 US qt) (0.18 Imp.qt)
Refer to “CHECKING THE FINAL GEAR OIL
LEVEL” on page 3-33.
EAS21510
CHECKING AND ADJUSTING THE
STEERING HEAD
1. Stand the vehicle on a level surface.
EWA13120
WARNING
Securely support the vehicle so that there is
no danger of it falling over.
Type
Shaft drive gear oil (Part No.: NOTE:
9079E-SH001-00)
Place the vehicle on a suitable stand so that the
4. Install: front wheel is elevated.
• Final gear oil filler bolt
3-33