Cleaning The Air Filter Element (FJR13AE)
Fragment manuala — str. 161
📋 Tekst do skopiowania / wyszukiwania
ENGINE
EAS20920
• Shift actuator
CLEANING THE AIR FILTER ELEMENT
Refer to “SHIFT ACTUATOR AND SHIFT
(FJR13A)
ROD (FJR13AE only)” on page 5-67.
1. Remove:
• Air filter case cover
• Rider seat
• Air filter element
• Left side cover
Refer to “GENERAL CHASSIS” on page 4-1.
• Air filter case cover
2. Clean:
• Air filter element
• Air filter element
Refer to “GENERAL CHASSIS” on page 4-1.
Apply compressed air to the outer surface of
2. Clean:
the air filter element.
• Air filter element
Apply compressed air to the outer surface of
the air filter element.
3. Check:
• Air filter element
Damage → Replace.
3. Check: EC3P61043
• Air filter element CAUTION:
Damage → Replace. Never operate the engine without the air filter
EC3P61043
CAUTION: element installed. Unfiltered air will cause
rapid wear of engine parts and may damage
Never operate the engine without the air filter
the engine. Operating the engine without the
element installed. Unfiltered air will cause
air filter element will also affect throttle body
rapid wear of engine parts and may damage
synchronization, leading to poor engine per-
the engine. Operating the engine without the
formance and possible overheating.
air filter element will also affect throttle body
synchronization, leading to poor engine per- 4. Install:
formance and possible overheating. • Air filter element
• Air filter case cover
4. Install:
Refer to “GENERAL CHASSIS” on page 4-1.
• Air filter element
• Shift actuator
• Air filter case cover
Refer to “SHIFT ACTUATOR AND SHIFT
• Left side cover
ROD (FJR13AE only)” on page 5-67.
• Rider seat
• Left side cover
Refer to “GENERAL CHASSIS” on page 4-1.
• Rider seat
NOTE: Refer to “GENERAL CHASSIS” on page 4-1.
When installing the air filter element into the air NOTE:
filter case cover, make sure their sealing surfac-
When installing the air filter element into the air
es are aligned to prevent any air leaks.
filter case cover, make sure their sealing surfac-
es are aligned to prevent any air leaks.
ET3P66028
CLEANING THE AIR FILTER ELEMENT
EAS21010
(FJR13AE)
CHECKING THE THROTTLE BODY JOINTS
1. Remove:
The following procedure applies to all of the
• Rider seat
throttle body joints and intake manifolds.
• Left side cover
Refer to “GENERAL CHASSIS” on page 4-1.
3-22