Checking The Oil Cooler

OIL COOLER

EAS26420

CHECKING THE OIL COOLER
1. Check:
 • Oil cooler
   Cracks/damage → Replace.
2. Check:
 • Oil cooler inlet hose
 • Oil cooler outlet hose
 • Water pump outlet hose
 • Water pump outlet pipe
 • Water jacket joint inlet hose
   Cracks/damage/wear → Replace.
EAS26430

INSTALLING THE OIL COOLER
1. Clean:
  • Mating surfaces of the oil cooler and the
    crankcase
    (with a cloth dampened with lacquer thinner)
2. Install:
  • O-ring New
  • Oil cooler

                Oil cooler bolt
       T.
           R.
                 12 Nm (1.2 m·kg, 8.7 ft·lb)
                 LOCTITE®

NOTE:
Make sure the O-ring is positioned properly.
3. Fill:
 • Cooling system
   (with the specified amount of the recom-
   mended coolant)
   Refer to “CHANGING THE COOLANT” on
   page 3-25.
 • Crankcase
   (with the specified amount of the recom-
   mended engine oil)
   Refer to “CHANGING THE ENGINE OIL” on
   page 3-15.
4. Check:
 • Cooling system
   Leaks → Repair or replace any faulty part.
5. Measure:
 • Radiator cap opening pressure
   Below the specified pressure → Replace the
   radiator cap.
   Refer to “CHECKING THE RADIATOR” on
   page 6-3.

                                                   6-5